CemeCon Deutschland
HiPIMS conference
Venlo, Netherlands
“The Influence of Pulse Parameters on Plasma Properties and Performance of HiPIMS Coatings for Cutting Tools” – Dr. Stephan Bolz, Executive Director Technology & Development
The latest in the world of tool coatings
Coatings can be customized as needed to meet market, tool material and tool design requirements.
This trend is becoming more and more evident.
Investment in our technology and our employees has made us the industry leader in HiPIMS and diamond coatings. The increased adoption of our HiPIMS coating technology by tool manufactures across the U.S. further expands its reach and proves the advantages it provides to our customers. Continued advancements will allow us to both strengthen our position in the marketplace and increase the cutting tool industry’s reliance on HiPIMS as a whole.
Jeff Barlow, President of CemeCon Inc.
Boost your machining tool business in just 90 sec
For the current expansion and modernization of our coating lines, it was out of the question for us to once again rely on proven expertise.
Markus Horn, Managing Director of Hartmetall-Werkzeugfabrik Paul Horn GmbH
With the CC800® HiPIMS we are taking coating technology in India to a whole NEW LEVEL.
Shoeb Rangwala, Managing Director of AddLife Coating Systems Pvt. Ltd.
Only CemeCon’s HiPIMS TECHNOLOGY allows us to adjust NUMEROUS VARIABLES to finely calibrate the power to perfectly match our, in some cases, EXTREMELY FILIGREE ACTIVE ELEMENTS – of which over 1,000 can be installed in a single high-performance progressive die! This has enabled us to take a HUGE STEP FORWARD in STAINLESS STEEL
Martin Hess, Head of Research and Development and Head of the Surface Technologies Department at Stepper
HiPIMS technology is perfect for this task: it results in extremely smooth, dense coatings that stay on the tap’s threads due to outstanding ductility. The exceptionally high ionization adds optimal film adhesion to the positive properties. And it ensures the reliable deposition of coatings containing carbon.
Dr. Biljana Mesic, supervises the adaptation of the layers for FANAR
HiPIMS technology offers us virtually boundless possibilities in the development of specific coating solutions. This enables us to achieve growth through new materials.
Marcin Kołodziej, president of Fabryka Narzędzi FANAR S.A.
The CC800® HiPIMS greatly enhances THE PERFORMANCE of our TAP DRILLS enabling us to GROW OUR BUSINESS.
Marcin Kołodziej, president of Fabryka Narzędzi FANAR S.A.
We have always been very satisfied with the results of the CC800®/9 XL. What is the next step? Which technology accelerates growth and our success? For this purpose, we carried out numerous tests with different manufacturers and examined all coatings thoroughly. The most superior system quickly emerged: the CC800® HiPIMS. It impressed us in every respect: For fast results, stainless 316L was machined in a test – and the HiPIMS system immediately stood out from all the other technologies and manufacturers. With regard to coating thickness in particular, the technology is groundbreaking – perfect for our inserts.
Xiao Xukai, proprietor of Zhuzhou Huarui Precision Cutting Tools Co., Ltd.
With the CC800® HiPIMS we are taking coating technology in India to a whole NEW LEVEL.
Shoeb Rangwala, Managing Director of AddLife Coating Systems Pvt. Ltd.
With the investment in the CC800® HiPIMS, we are strengthening the successful and longstanding COOPERATION with CemeCon. This technology is opening up NEW TARGET GROUPS for us.
Dipl.-Ing. Volkmar Kanne, CEO of Kanne Premiumwerkzeuge
Actively managing A WIDE RANGE OF VARIANTS – each in PREMIUM QUALITY – is the core of the PROTECH INNOVATION CENTER. I see the CC800® HiPIMS from CemeCon as a cornerstone in our FUTURE STRATEGY.
Miroslav Palo, CEO of ProTech Service, s.r.o.
The partially chemical-based pretreatment procedures on the tool in the CVD diamond process constitute a slightly higher hurdle for a more ‘mechanically’ aligned operation like Fraisa. But in this case, we also managed to produce our own coatings in a very short time, thanks to the excellent support from the system and technology supplier CemeCon and its well-trained staff. Today, a large team of engineers and technicians works on the finishing of high profile tools.
Dr. Hans Rechberger, Head of Material and Surface Technology at Fraisa
We feel it is extremely important to design the tools specifically for the application. The key question here is which diamond tool type is best suited for each application. This way, we can always offer an optimized, tailored ‘package’ to the customer. With the in-house diamond coating line from CemeCon, Fraisa has become the jewel among tool manufacturers.
Dr. Hans Rechberger, Head of Material and Surface Technology at Fraisa
Save the date
CemeCon Deutschland
Horn Technology Days
Tübingen, Germany
„HIPIMS – Quantensprung in der Beschichtung von Werkzeugen“ von Dr. Christoph Schiffers, Product Management Coating Equipment
CemeCon Deutschland
PVD-/ CVD Dünnschichttechnologie Seminar IOT
IOT, Aachen, Germany
22.06.2022
10:30 – 11:15 Uhr
„Von der Bauteilfertigung zur Beschichtung“ Dr. Christoph Schiffers, Product Management Coating Equipment
„PVD-Schichten für Zerspananwendungen“ Dr. Stephan Bolz, Executive Director Technology & Development
13:50 – 16:20 Uhr
Exkursion: Werksführung bei der CemeCon AG
CemeCon Deutschland
EMO Hannover
Hanover, Germany
CemeCon Deutschland
Toolex
Katowice, Poland
CemeCon Deutschland
Reactive Sputter Deposition RSD
Leipzig, Germany
