CemeCon Deutschland
HiPIMS conference
Venlo, Netherlands
“The Influence of Pulse Parameters on Plasma Properties and Performance of HiPIMS Coatings for Cutting Tools” – Dr. Stephan Bolz, Executive Director Technology & Development
50% of a perfect coating
...comes from choosing the right coating material. Learn more about how CemeCon manages the remaining 50% to produce a premium coating.
Electromobility, communication, medical technology - develop your business in these markets with CemeCon coating technologies.
For you, as a manufacturer of precision tools, we offer the most innovative coating technologies with HiPIMS and diamond and thus the largest selection of premium coating materials on the market.
Successful precision tools are the result of optimal substrate, elaborated geometry and the best individual premium coating.
This is how we treat your precision tools at CemeCon!
Unrivaled products through CemeCon Engineering
We perfectly match your individual premium coating to your precision tool
- Selection of the suitable coating process and assembly of the appropriate coating material specification for your precision tool. Adapted to the machining task, specified application parameters and other technical and commercial objectives for your precision tool, we will compose your premium coating from numerous options. This includes, for example, the pre- and post-treatment, the coating thickness, final dimension with measurement report, tolerances, colors, packaging and much more.
- You supply us with your prototypes, we coat them with the best coating materials in the world, then you test the quality of the tool in use. Together, we achieve the desired performance goals of your precision tool.
For the current expansion and modernization of our coating lines, it was out of the question for us to once again rely on proven expertise.
Markus Horn, Managing Director of Hartmetall-Werkzeugfabrik Paul Horn GmbH
With the CC800® HiPIMS we are taking coating technology in India to a whole NEW LEVEL.
Shoeb Rangwala, Managing Director of AddLife Coating Systems Pvt. Ltd.
Only CemeCon’s HiPIMS TECHNOLOGY allows us to adjust NUMEROUS VARIABLES to finely calibrate the power to perfectly match our, in some cases, EXTREMELY FILIGREE ACTIVE ELEMENTS – of which over 1,000 can be installed in a single high-performance progressive die! This has enabled us to take a HUGE STEP FORWARD in STAINLESS STEEL
Martin Hess, Head of Research and Development and Head of the Surface Technologies Department at Stepper
HiPIMS technology is perfect for this task: it results in extremely smooth, dense coatings that stay on the tap’s threads due to outstanding ductility. The exceptionally high ionization adds optimal film adhesion to the positive properties. And it ensures the reliable deposition of coatings containing carbon.
Dr. Biljana Mesic, supervises the adaptation of the layers for FANAR
HiPIMS technology offers us virtually boundless possibilities in the development of specific coating solutions. This enables us to achieve growth through new materials.
Marcin Kołodziej, president of Fabryka Narzędzi FANAR S.A.
The CC800® HiPIMS greatly enhances THE PERFORMANCE of our TAP DRILLS enabling us to GROW OUR BUSINESS.
Marcin Kołodziej, president of Fabryka Narzędzi FANAR S.A.
We have always been very satisfied with the results of the CC800®/9 XL. What is the next step? Which technology accelerates growth and our success? For this purpose, we carried out numerous tests with different manufacturers and examined all coatings thoroughly. The most superior system quickly emerged: the CC800® HiPIMS. It impressed us in every respect: For fast results, stainless 316L was machined in a test – and the HiPIMS system immediately stood out from all the other technologies and manufacturers. With regard to coating thickness in particular, the technology is groundbreaking – perfect for our inserts.
Xiao Xukai, proprietor of Zhuzhou Huarui Precision Cutting Tools Co., Ltd.
With the CC800® HiPIMS we are taking coating technology in India to a whole NEW LEVEL.
Shoeb Rangwala, Managing Director of AddLife Coating Systems Pvt. Ltd.
With the investment in the CC800® HiPIMS, we are strengthening the successful and longstanding COOPERATION with CemeCon. This technology is opening up NEW TARGET GROUPS for us.
Dipl.-Ing. Volkmar Kanne, CEO of Kanne Premiumwerkzeuge
Actively managing A WIDE RANGE OF VARIANTS – each in PREMIUM QUALITY – is the core of the PROTECH INNOVATION CENTER. I see the CC800® HiPIMS from CemeCon as a cornerstone in our FUTURE STRATEGY.
Miroslav Palo, CEO of ProTech Service, s.r.o.
The partially chemical-based pretreatment procedures on the tool in the CVD diamond process constitute a slightly higher hurdle for a more ‘mechanically’ aligned operation like Fraisa. But in this case, we also managed to produce our own coatings in a very short time, thanks to the excellent support from the system and technology supplier CemeCon and its well-trained staff. Today, a large team of engineers and technicians works on the finishing of high profile tools.
Dr. Hans Rechberger, Head of Material and Surface Technology at Fraisa
We feel it is extremely important to design the tools specifically for the application. The key question here is which diamond tool type is best suited for each application. This way, we can always offer an optimized, tailored ‘package’ to the customer. With the in-house diamond coating line from CemeCon, Fraisa has become the jewel among tool manufacturers.
Dr. Hans Rechberger, Head of Material and Surface Technology at Fraisa
Test the best!
We love challenges and the more special they are, the more clear it becomes that CemeCon delivers the best coatings in the world. Compare and put us to the test. You can only win with this!
Start video
Just a call away +1 607 562 2363
Save the date
CemeCon Deutschland
Horn Technology Days
Tübingen, Germany
„HIPIMS – Quantensprung in der Beschichtung von Werkzeugen“ von Dr. Christoph Schiffers, Product Management Coating Equipment
CemeCon Deutschland
PVD-/ CVD Dünnschichttechnologie Seminar IOT
IOT, Aachen, Germany
22.06.2022
10:30 – 11:15 Uhr
„Von der Bauteilfertigung zur Beschichtung“ Dr. Christoph Schiffers, Product Management Coating Equipment
„PVD-Schichten für Zerspananwendungen“ Dr. Stephan Bolz, Executive Director Technology & Development
13:50 – 16:20 Uhr
Exkursion: Werksführung bei der CemeCon AG
CemeCon Deutschland
EMO Hannover
Hanover, Germany
CemeCon Deutschland
Toolex
Katowice, Poland
CemeCon Deutschland
Reactive Sputter Deposition RSD
Leipzig, Germany
The best recipes! We coat over 80,000 tools every day. On our own equipment. For 35 years. We use the know-how we have gained to the advantage of our customers.
